| Product: Linear Automatic Welding Machine |
| 1. Summary: |
|
This machine is specially designed to weld the straight seam of the cylinder, hot-water heater, drum, and square container.
Back-up rod adopts water cooling method. Keyboard style pressure hold-down. Back-up rod can be changed as per requirement. Welded seam is flat and straight. Good weld penetration and weld quality. |
| 2. Capabilities/Equipment Instructions: |
| A. |
Traveling track way: Driving member consists of linear slide way and ball bearing worm. Smooth travel no jerk. High efficient transmission. Effective travel: 380mm. |
| B. |
Circular Back-up Rod: In using of water cooling method for water circulation system. Good cooling effect results in good weld joint quality. |
| C. |
Back-up copper: The design is subject to change based on the contour, sheet metal thickness, welding method of the work piece. |
| D. |
Pressure Hold-down: The keyboard style pressure hold-down in using of the air bag results in uniform pressure distribution. The weld joint is flat and even. |
| E. |
Center Pin: To use center pin cylinder operation to center location the work piece. Easy operation and precise orientation. |
| F. |
Work-piece pre-spots welding: To pre-weld the front guide arc board and the tail board. A straight line can be placed on the front guide arc board and the tail board in order to align the center line. |
| G. |
Work piece location board: location board to fix the length of the work piece is done by manual. Location is adjustable as per the length of the work piece. |
| H. |
Tail fastener: In using of pneumatic fastener, |
| I. |
Up /down location of the welding gun: By up/down
travel of the cylinder. Travel: 50mm |
| J. |
The position/angle adjustment of the welding gun: The position of the welding gun is adjustable to X/Y direction. Adjustable weld angle. S=50x50mm |
